Standard-horizon VHF/FM Marine Handheld Transceiver HX600S Manuel d'utilisateur télécharger pdf (Page 37)

HX600S Page 35

dtdt

dt (DUAL WATCH MODE)

Function: Selects dual or tri-watch as desired.

Available Values: d- (Dual Watch) / t- (Tri Watch)

Default: d-

drdr

dr (DIMMER)

Function: Setting of the Display brightness level.

Available Values: 00 / 01 / 02 / 03

Default: 02

PCPC

PC (AUDIO PITCH CONTROL)

Function: This control changes the speaker audio to have a high or lower

sounding pitch to assist listening in quiet or noisy environments.

Available Values: ON / OFF

Default: OFF

SOSSOS

SOS (STROBE)

Function: Selects the S.O.S STROBE illumination from Continuously on to

SOS strobe.

Available Values: Continue / SOS

Default: SOS

StPStP

StP (AM STEP)

Function: Selects the AM Band frequency step size.

Available Values: 10kHz or 9kHz (for Europe)

Default: 10kHz

rEgrEg

rEg (MMSI REG)

Function: Stores MMSI ID code.

Note: The MMSI can only be inputted twice. If entered more than twice, the

HX600S will have to be sent to STANDARD HORIZON factory service to

reset the MMSI.

nA1 - nA6nA1 - nA6

nA1 - nA6 (NOAA Weather SAME Area 1 - 6)

Function: Stores NOAA Weather SAME AREA code.

The HX600S is capable of being programmed with 6 areas or your choice to

receive SAME messages. To enable the SAME function the HX600S must

be programmed with a 6 digit SAME code for the state and county you want

to receive alerts. After the code(s) are programmed the HX600S will ONLY

respond to messages encrypted with the specific state/county that has been

programmed.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Standard-horizon VHF/FM Marine Handheld Transceiver HX600S Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour bateaux Standard-horizon VHF/FM Marine Handheld Transceiver HX600S