Standard-horizon MATRIX GX3000S Manuel d'utilisateur Page 36
- Page / 100
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
GX3000SPage 36
11.2 MARITIME MOBILE SERVICE IDENTITY (MMSI)
11.2.1 What is an MMSI?
An MMSI is a nine digit number used on Marine Transceivers capable of using
Digital Selective Calling (DSC). This number is used like a telephone number to
selectively call other vessels.
THIS NUMBER MUST BE PROGRAMMED INTO THE RADIO TO OPERATE
THE GX3000S DSC FUCTIONS.
How can I obtain an MMSI assignment?
Boat US offers online registration of a MMSI. Visit www.boatus.com/mmsi
11.2.2 Programming the MMSI
WARNING
User MMSI can be input only twice. If the user tries to input an MMSI
more than twice, the radio will show the display on
the right. If the user needs to change the MMSI
more than twice, the transceiver will have to be
sent to Factory Service. Refer to the section “15.2.
FACTORY SERVICE.”
1. Press and hold down the
[
CALL
(
MENU
)]
key until
the “Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to the left to se-
lect “DSC Setup” menu.
3. Press the
[
ENT
]
key, then select “User MMSI” with
the CHANNEL selector knob.
4. Press the
[
ENT
]
key. The display will show a series
of dashes or the last MMSI number if programmed.
5. Turn the CHANNEL selector knob or press the
[
UP
(
)]
/
[
DOWN
(
)]
key on the microphone to se-
lect the first number of your MMSI, then press the
[
ENT
]
key to step to the next number.
6. Repeat step 5 to set your MMSI (up to nine digits).
7. When finished programming the number, press and
hold the
[
ENT
]
key to store the number in memory.
8. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
- MATRIX GX3000S 1
- Owner's Manual 1
- TABLE OF CONTENTS 2
- 1 GENERAL INFORMATION 4
- 2 PACKING LIST 4
- 3 OPTIONS 4
- Antenna Installation: 5
- ON-LINE WARRANTY REGISTRATION 5
- STATION LICENSE 6
- RADIO CALL SIGN 6
- 6 FCC NOTICE 7
- 7 GETTING STARTED 8
- 7.3 COAXIAL CABLE 9
- 8 INSTALLATION 10
- 8.3 ACCESSORY CABLE 11
- 8.4 CHECKING GPS CONNECTIONS 12
- 8.5 CHANGING THE GPS TIME 12
- “LOCAL” mode 13
- “UTC” mode 13
- Adjusting Screw 15
- Lock-washer nut combination 15
- Figure 2 16
- Figure 3 16
- 9 CONTROLS AND INDICATORS 18
- Radio Setup” 20
- DSC Setup” menu (re 20
- Page 23GX3000S 23
- 10 BASIC OPERATION 24
- 10.6 NOAA WEATHER CHANNELS 25
- 10.7 EMERGENCY 26
- CHANNEL 16 USE 26
- 10.8 CALLING ANOTHER VESSEL 27
- CHANNEL 16 OR 9 27
- 10.9 MAKING TELEPHONE CALLS 27
- 10.11 DUAL WATCH 28
- TO PRIORITY CHANNEL 28
- 10.12 SCANNING 29
- 10.12.3 Priority Scanning 30
- P-SCAN” appears on the LCD 30
- 10.13 PA/FOG OPERATION 31
- PA HAIL mode: 31
- FOG HORN mode: 31
- 10.14 NAVIGATION INDICATION 32
- 10.15 INTERCOM OPERATION 32
- 10.15.1 Communication 33
- Ram1, Ram2, or ALL) with the 33
- Intercom” is displayed on the 33
- Talk” will be 33
- 10.15.2 Calling 33
- 10.16 VOICE SCRAMBLER 34
- 11 DIGITAL SELECTIVE CALLING 35
- DISTRESS 35
- PULL OPEN 35
- 11.2.1 What is an MMSI? 36
- 11.2.2 Programming the MMSI 36
- 11.3 DSC DISTRESS CALL 37
- 11.4 ALL SHIPS CALL 39
- 11.5 INDIVIDUAL CALL 41
- Manual,” 45
- 11.6 CALL WAITING DIRECTORY 46
- 11.7 GROUP CALL 48
- DSC Operation” 50
- Group Directory” will appear 50
- 11.7.3 Receiving a Group Call 51
- 11.8 POSITION REQUEST 52
- 11.9 POSITION SEND 56
- Radio Setup” menu appears 58
- POS Input” with 58
- 12 RADIO SETUP 59
- 12.3 TIME OFFSET 60
- 12.4 TIME LOCATION 61
- 12.5 TRUE MAGNETIC CHANGE 61
- NAV display 61
- 12.6 PRIORITY CHANNEL SET 62
- 12.7 SCAN TYPE 62
- 12.8 SCAN RESUME TIME 63
- 12.9 KEY BEEP 63
- 12.10 WX ALERT 64
- 12.11 VOICE SCRAMBLER 64
- 12.12 CHANNEL NAME CHANGE 65
- Unit Name” in the 66
- Unit Name” menu 66
- 13.1 RAM+ MIC CONTROLS 68
- 13.2 PA/FOG OPERATION 70
- 13.3 INTERCOM OPERATION 71
- 13.4 DSC/RADIO SETUP MODE 72
- Page 73GX3000S 73
- 14 VH-310 HANDSET OPERATION 74
- 14.2 PA/FOG OPERATION 78
- 14.3 INTERCOM OPERATION 79
- DSC SETUP” menu 80
- POS INPUT” with the 80
- 14.5 DSC/RADIO SETUP MODE 81
- Page 83GX3000S 83
- 15 MAINTENANCE 84
- 15.2 FACTORY SERVICE 85
- 15.3 TROUBLESHOOTING CHART 86
- Page 87GX3000S 87
- 16 CHANNEL ASSIGNMENTS 88
- Page 89GX3000S 89
- Channel 16 89
- GX3000SPage 90 90
- Page 91GX3000S 91
- GX3000SPage 92 92
- Page 93GX3000S 93
- 17 WARRANTY 94
- 18 SPECIFICATIONS 97
- FOG HORN TIMING CHART 98
- Page 99GX3000S 99
- GX3000SPage 100 100
Produits connexes et manuels pour Accessoires pour bateaux Standard-horizon MATRIX GX3000S
(88 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.888 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels