Standard-horizon MATRIX GX3000S Manuel d'utilisateur Page 84
- Page / 100
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
GX3000SPage 84
15 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will
prevent damage to the transceiver.
• Keep the microphone connected or the jack covered at all times to prevent
corrosion of electrical contacts;
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.
• Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility. Address and phone numbers for this facility, as well as warranty
information, are contained in section “17 WARRANTY.”
15.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:
Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone (714) 827-7600
Commonly requested parts, and their part numbers are listed below.
• Panel Cover: RA0772200
• Power Cord: T9023306
• VOL/SQL Knob
(
Black
)
: RA0771400
• VOL/SQL Knob
(
White
)
: RA0771300
• Rotary Channel Knob
(
Black
)
: RA0771600
• Rotary Channel Knob
(
White
)
: RA0771500
• Mounting Bracket
(
Black
)
: RA0773200
• Mounting Bracket
(
White
)
: RA0773100
• Mounting Bracket Knob
(
Black
)
: RA045910A
• Mounting Bracket Knob
(
White
)
: RA043770A
• Microphone Hanger
(
Black
)
: RA0458800
• Microphone Hanger
(
White
)
: RA0436000
• CMP25 RAM+ Mic or VH-310 Routing Cable Assembly: S8101512
- MATRIX GX3000S 1
- Owner's Manual 1
- TABLE OF CONTENTS 2
- 1 GENERAL INFORMATION 4
- 2 PACKING LIST 4
- 3 OPTIONS 4
- Antenna Installation: 5
- ON-LINE WARRANTY REGISTRATION 5
- STATION LICENSE 6
- RADIO CALL SIGN 6
- 6 FCC NOTICE 7
- 7 GETTING STARTED 8
- 7.3 COAXIAL CABLE 9
- 8 INSTALLATION 10
- 8.3 ACCESSORY CABLE 11
- 8.4 CHECKING GPS CONNECTIONS 12
- 8.5 CHANGING THE GPS TIME 12
- “LOCAL” mode 13
- “UTC” mode 13
- Adjusting Screw 15
- Lock-washer nut combination 15
- Figure 2 16
- Figure 3 16
- 9 CONTROLS AND INDICATORS 18
- Radio Setup” 20
- DSC Setup” menu (re 20
- Page 23GX3000S 23
- 10 BASIC OPERATION 24
- 10.6 NOAA WEATHER CHANNELS 25
- 10.7 EMERGENCY 26
- CHANNEL 16 USE 26
- 10.8 CALLING ANOTHER VESSEL 27
- CHANNEL 16 OR 9 27
- 10.9 MAKING TELEPHONE CALLS 27
- 10.11 DUAL WATCH 28
- TO PRIORITY CHANNEL 28
- 10.12 SCANNING 29
- 10.12.3 Priority Scanning 30
- P-SCAN” appears on the LCD 30
- 10.13 PA/FOG OPERATION 31
- PA HAIL mode: 31
- FOG HORN mode: 31
- 10.14 NAVIGATION INDICATION 32
- 10.15 INTERCOM OPERATION 32
- 10.15.1 Communication 33
- Ram1, Ram2, or ALL) with the 33
- Intercom” is displayed on the 33
- Talk” will be 33
- 10.15.2 Calling 33
- 10.16 VOICE SCRAMBLER 34
- 11 DIGITAL SELECTIVE CALLING 35
- DISTRESS 35
- PULL OPEN 35
- 11.2.1 What is an MMSI? 36
- 11.2.2 Programming the MMSI 36
- 11.3 DSC DISTRESS CALL 37
- 11.4 ALL SHIPS CALL 39
- 11.5 INDIVIDUAL CALL 41
- Manual,” 45
- 11.6 CALL WAITING DIRECTORY 46
- 11.7 GROUP CALL 48
- DSC Operation” 50
- Group Directory” will appear 50
- 11.7.3 Receiving a Group Call 51
- 11.8 POSITION REQUEST 52
- 11.9 POSITION SEND 56
- Radio Setup” menu appears 58
- POS Input” with 58
- 12 RADIO SETUP 59
- 12.3 TIME OFFSET 60
- 12.4 TIME LOCATION 61
- 12.5 TRUE MAGNETIC CHANGE 61
- NAV display 61
- 12.6 PRIORITY CHANNEL SET 62
- 12.7 SCAN TYPE 62
- 12.8 SCAN RESUME TIME 63
- 12.9 KEY BEEP 63
- 12.10 WX ALERT 64
- 12.11 VOICE SCRAMBLER 64
- 12.12 CHANNEL NAME CHANGE 65
- Unit Name” in the 66
- Unit Name” menu 66
- 13.1 RAM+ MIC CONTROLS 68
- 13.2 PA/FOG OPERATION 70
- 13.3 INTERCOM OPERATION 71
- 13.4 DSC/RADIO SETUP MODE 72
- Page 73GX3000S 73
- 14 VH-310 HANDSET OPERATION 74
- 14.2 PA/FOG OPERATION 78
- 14.3 INTERCOM OPERATION 79
- DSC SETUP” menu 80
- POS INPUT” with the 80
- 14.5 DSC/RADIO SETUP MODE 81
- Page 83GX3000S 83
- 15 MAINTENANCE 84
- 15.2 FACTORY SERVICE 85
- 15.3 TROUBLESHOOTING CHART 86
- Page 87GX3000S 87
- 16 CHANNEL ASSIGNMENTS 88
- Page 89GX3000S 89
- Channel 16 89
- GX3000SPage 90 90
- Page 91GX3000S 91
- GX3000SPage 92 92
- Page 93GX3000S 93
- 17 WARRANTY 94
- 18 SPECIFICATIONS 97
- FOG HORN TIMING CHART 98
- Page 99GX3000S 99
- GX3000SPage 100 100
Produits connexes et manuels pour Accessoires pour bateaux Standard-horizon MATRIX GX3000S
(88 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.817 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels